Audio Technica At2020 How To Set Up

Audio Solutions Question of the Week: How Practise I Set Up the AT2020PK or AT2035PK Streaming/Podcasting Pack?

Question : How do I fix up the AT2020PK or AT2035PK Streaming/Podcasting Packs?

Answer : The popular AT2020 and AT2035 microphones are become-to choices for podcasters, streamers, and dwelling recording enthusiasts. Audio-Technica has besides created streaming packs that include one of these microphones, a boom microphone arm with integrated microphone cablevision, and a pair of the ATH-M20x studio monitoring headphones. The AT2020PK includes the AT2020 microphone with a swivel mount to attach to the boom arm, whereas the AT2035PK includes the AT2035 microphone as well as the AT8458 shock mount to attach to the boom arm. Before using for the first fourth dimension, you will want to ensure that you properly set upward the microphone and cable, and configure the connections to your microphone preamp.

Set upwards the nail arm. You may attach the boom arm base of operations clamp to a flat surface, such as a table or desk, that's up to 2″ thick. The clamp is padded to protect the surface you attach it to. The nail arm fits into the base clamp. Earlier mounting the microphone to the boom arm, tighten the screws at the base and middle of the boom arm. Employ a 7 mm wrench to tighten and loosen the top nut on the boom arm. This will allow you to arrange the pivot point where the microphone mount attaches to the boom arm. Be certain not to tighten excessively.

Attach the mount and microphone to the boom arm. For the AT2020 microphone, thread the swivel mount onto the boom arm. The microphone may exist inserted and threaded into the swivel mount by turning the ring nut on the mount. Brand certain the microphone is fully secured into the mount. For the AT2035 microphone, thread the AT8458 shock mount onto the smash. If not already in place, yous will need to insert the included v/8-27″ thread adapter into the stupor mountain before connecting it to the boom arm. The microphone must be inserted into the mount from the proper direction. The slot ring on the shock mountain volition connect with the microphone, ensuring that you are properly attaching the microphone to the mount. Both the AT2020 and the AT2035 are side-address microphones, so make certain that the front end of the microphone is facing the location where the person speaking will be. Either microphone may be positioned upwardly or downwardly, depending on your preference. The front of the AT2020 and the AT2035 is identified by the Sound-Technica logo. The back of the AT2020 is also labeled as "Back." The integrated XLR female connection of the cable in the boom arm may be attached to either the AT2020 or the AT2035.

Connect the microphone cable to your microphone preamp. Both the AT2020 and the AT2035 microphones take an analog signal and may be connected to a microphone preamp for home studio use or to other analog microphone-level connections such equally those on a audio system or portable recorder.* To connect to a calculator, you will need to use an sound interface or a mixer with a digital connection. Some audio interfaces and mixers accept multiple microphone connections, assuasive you to use several microphones simultaneously in your setup.

*As both the AT2020 and AT2035 are condenser microphones, they require phantom power to operate. The sound interface, mixer, recorder, or microphone preamp you connect to the microphone will need to provide the DC voltage. If your existing equipment does not provide this ability, you may apply an external in-line phantom ability supply. To plough on the power, you lot may need to printing a push or change a setting to engage. The ATH-M20x headphones may be connected to the headphone connectedness on your audio interface or mixer. To hear the signal, some audio interfaces and mixers allow for direct monitoring from the input (microphone), while others require additional configurations within the calculator and applications. Refer to the setup instructions provided past your interface's or mixer's manufacturer.

To get the near out of your Audio-Technica Podcasting Pack, information technology is of import to apply the microphone properly. Kickoff and foremost, you will want to ensure you are speaking into the front end of the microphone element. As mentioned above, both the AT2020 and AT2035 are side-address microphones, so yous will too need to speak into – or address – the side of the microphone and not the end of it. This is dissimilar traditional handheld or live microphones that are end-accost models, requiring that y'all speak into the end or top of the microphone. One way to tell if you lot are addressing the microphone correctly is to mind as you lot speak into different sides of information technology. The AT2020 and AT2035 have a cardioid directional pickup, so the optimal pickup area will be direct in front of the microphone chemical element. Every bit yous move away from this optimal spot and speak into the sides and dorsum of the microphone pickup area, the sound will decrease in volume and quality. This may be used to your advantage to forbid unwanted sounds from existence picked up by the microphone. If you lot are typing on a computer keyboard while speaking, for example, y'all may position the null pickup (or back of the microphone) towards the keyboard to minimize pickup of the keyboard sound. Additionally, you lot may speak off axis of the microphone element to reduce popping associated with plosives, such as P's and B's, which is caused by excessive jiff directed onto the microphone. Y'all may also use a windscreen or pop filter to reduce unwanted sound from plosives.

Condenser microphones such as the AT2020 and the AT2035 are more sensitive than dynamic microphones. This is nifty if you are in a location with proper audio-visual treatment or an acceptable acoustic environment. This may non be optimal if you lot are in a noisy environment and the microphone is more susceptible to picking up unwanted sounds. If that is the case, you may remedy this by moving the source (your oral cavity) closer to the microphone element and adjusting your input level appropriately.

The video below shows you how to prepare up your AT2020PK and AT2035PK Podcasting Packs. If yous have further setup questions or demand tips for using your podcasting pack, please contact the Audio Solutions Department for assistance.

Source: https://www.audio-technica.com/en-us/support/audio-solutions-question-of-the-week-how-do-i-set-up-the-at2020pk-or-at2035pk-podcasting-pack/

Share this post